Indianapolis Downtown Dental Office Blog

Posts for tag: dental implants

By Renew Dental Arts, LLC
August 24, 2019
Category: Dental Procedures
Tags: dental implants   dentures  
Implant-SupportedDenturesCouldImproveYourBoneHealth

Generations have depended on dentures to effectively and affordably replace lost teeth. But they do have a major weakness: They contribute to jawbone loss that creates not only mouth and facial problems, but can also ruin a denture’s fit.

Bone loss is a normal consequence of losing teeth. The biting forces normally generated when we chew stimulate new bone to replace older bone. When a tooth is missing, however, so is that chewing stimulation. This can slow bone replacement growth and gradually decrease the density and volume of affected bone.

While dentures can restore dental appearance and function, they can’t restore this growth stimulation. What’s worse, the pressure of the dentures against the gum-covered jaw ridge they rest upon may irritate the underlying bone and accelerate loss.

But there is a solution to the problem of denture-related bone loss: an implant-supported denture. Rather than obtaining its major support from the gum ridges, this new type of denture is secured by strategically-placed implants that connect with it.

Besides the enhanced support they can provide to a denture restoration, implants can also deter bone loss. This is because of the special affinity bone cells have with an implant’s imbedded titanium post. The gradual growth of bone on and around the implant surface not only boosts the implant’s strength and durability, it can also improve bone health.

There are two types of implant-supported dentures. One is a removable appliance that connects with implants installed in the jaw (three or more for the upper jaw or as few as two in the lower). It may also be possible to retrofit existing dentures to connect with implants.

The other type is a fixed appliance a dentist permanently installs by screwing it into anywhere from four and six implants. The fixed implant-supported denture is closer to the feel of real teeth (you’ll brush and floss normally), but it’s usually more costly than the removable implant-supported denture.

While more expensive than traditional ones, implant-supported dentures still cost less than other restorations like individual implant tooth replacements. They may also help deter bone loss, which may lead to a longer lasting fit with the dentures. Visit your dentist for an evaluation of your dental condition to see if you’re a good candidate for this advanced form of dental restoration.

If you would like more information on implant-supported dentures, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Overdentures & Fixed Dentures.”

By Renew Dental Arts, LLC
April 06, 2019
Category: Oral Health
WhyYouShouldFlossAroundtheImplantsSupportingYourBridge

We've been using bridges to replace missing teeth for decades. Now, recently-developed implant-supported bridges are even more dependable, promising greater durability and less interference with remaining natural teeth.

But just like other restorations, you'll need to keep implant bridges clean to ensure their longevity. Although both the bridge and implants are impervious to disease, the supporting gums and bone aren't. If they become infected, they can break down and your restoration will fail.

Cleaning an implant-supported bridge includes flossing around each of the implants to remove dental plaque, a thin film of food particles and bacteria most responsible for dental disease. To perform this task, you'll have to pass the floss between the bridge and gums to access the sides of each implant.

To help make it easier, you can use a tool like a floss threader, a thin, shaft-like device with a loop on one end and a needle-like point on the other. You'll first thread about 18" of floss through the end and then pass the threader between the bridge and gums with the sharp end toward the tongue.

With the threader completely through, you'll then wrap the floss around your fingers as with regular flossing and move the floss up and down each side of the implants you can access. You'll then pull the floss out, reload the threader and move to the next section, repeating this process until you've flossed each side of each implant.

You can also use pre-cut floss with a stiffened end to thread between the bridge and gums or an interproximal brush with a thin bristled head that can reach underneath the bridge. And you might consider using an oral irrigator, a pump device that sprays a stream of pressurized water to remove and flush away plaque around implants.

To round out your hygiene efforts, be sure you visit your dentist at least twice a year for dental cleanings. Your dentist can also advise you and give you training on keeping your implants clear of disease-causing plaque. Cleaning around your implants will help ensure your restoration will last.

If you would like more information on caring for your dental restoration, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”

By Renew Dental Arts, LLC
February 05, 2019
Category: Dental Procedures
WemayNeedtoBuilduptheBoneinYourJawbeforeImplants

Dental implant technology has advanced at such an astounding rate in recent years that you can now walk into a dentist's office with a problem tooth and out the same day with a new one. Unfortunately, not all dental situations allow for this possibility.

For example, you might be considering an implant many years after losing a tooth. But there's a potential problem: there might not be enough supporting bone. While an implant might still be possible, inadequate bone complicates the matter.

Because implants are essentially tooth root replacements, they require a certain amount of bone for stability and the best attractive outcome. As a general rule, implants need to be surrounded by  at least 1.5-2.0 millimeters of healthy bone to support an implant. But you might not have enough if your tooth has been missing for awhile, regardless if you have or haven't worn dentures or other restorations.

That's because bone has a life cycle in which older cells die and newer ones form to take their place. As we chew or bite, the force generated travels up through the teeth to the bone to stimulate this new growth. Without a tooth the bone doesn't receive this stimulus, which can slow the growth rate. Over time the affected bone can lose its volume and density.

If we find you've experienced loss to the point your bone won't support an implant, that doesn't automatically mean this popular restoration is out of the picture. But it will require us first performing a procedure known as augmentation or bone grafting to help rejuvenate some of the lost bone.

With grafting, we place processed bone grafting material in the jaw through a minor surgical procedure to form a scaffold for new bone to grow upon. After several months this can result in several millimeters of new growth maintaining the width of the underlying bone, which in turn may be able to support an implant.

Bone grafting is quite common, often performed at the same time as tooth extraction if there's going to be a time lag before installing an implant. Even if performed later, though, it can successfully rejuvenate lost bone and make it possible for you to take advantage of durable, life-like implants.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants after Previous Tooth Loss.”

By Renew Dental Arts, LLC
October 18, 2018
Category: Dental Procedures
Tags: dental implants   smoking  
3ReasonsWhySmokingDoesntMixwithDentalImplants

If you smoke, you know better than anyone how a hard a habit it is to kick. If you want to quit, it helps to have a motivating reason—like lowering your risk for cancer, cardiovascular disease or similar conditions.

Here’s another reason for quitting tobacco: it could be making your teeth and gums less healthy. And, if you’re facing a restoration like dental implants, smoking can make that process harder or even increase the risk of failure.

So, to give your willpower some needed pep talk material, here are 3 reasons why smoking doesn’t mix with dental implants.

Inhaled smoke damages mouth tissues. Though you may not realize it, the smoke from your cigarette or cigar is hot enough to burn the top layer of skin cells in your mouth, which then thickens them. This could affect your salivary glands causing them to produce less saliva, which in turn could set off a chain of events that increases your risk of tooth decay or periodontal (gum) disease. The end result might be bone loss, which could make installing dental implants difficult if not impossible.

Nicotine restricts healthy blood flow. Nicotine, the chemical tobacco users crave, can restrict blood flow in the tiny vessels that course through the mouth membranes and gums. With less blood flow, these tissues may not receive enough antibodies to fight infection and fully facilitate healing, which could interfere with the integration of bone and implants that create their durable hold. Slower healing, as well as the increased chances of infection, could interrupt this integration process.

Smoking contributes to other diseases that impact oral health. Smoking’s direct effect on the mouth isn’t the only impact it could have on your oral health. As is well known, tobacco use can increase the risk of systemic conditions like cardiovascular and lung disease, and cancer. These conditions may also trigger inflammation—and a number of studies are showing this triggered inflammatory response could also affect your body’s ability to fight bacterial infections in the mouth. Less healthy teeth, gums and underlying bone work against your chances of long-term success with implants.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants & Smoking: What are the Risks?

By Renew Dental Arts, LLC
June 20, 2018
Category: Dental Procedures
Tags: dental implants   bone graft  
BoneGraftingMightbeNecessaryBeforeYouObtainanImplant

Every year dentists place over 5 million dental implants for lost teeth, often removing the problem tooth and installing the implant at the same time. But getting a “tooth in a day” depends on a number of health factors, especially whether or not there’s adequate bone available for the implant. Otherwise, the implant’s placement accuracy and success could be compromised.

Bone loss can be a similar problem when a tooth has been missing for a long period of time. If this describes your situation, you may have already lost substantial bone in your jaw. To understand why, we need to know a little about bone’s growth cycle.

When bone cells reach the end of their useful life, they’re absorbed into the body by a process called resorption.  New cells then form to take the older cells’ place in a continuous cycle that keeps the bone healthy and strong. Forces generated when we chew travel through the teeth to the bone and help stimulate this growth. But when a tooth is missing, the bone doesn’t receive this stimulus. As a result, the bone may not replace itself at a healthy rate and diminish over time.

In extreme cases, we may need to consider some other dental restoration other than an implant. But if the bone loss isn’t too severe, we may be able to help increase it through bone grafting. We insert safe bone grafting material prepared in a lab directly into the jaw through a minor surgical procedure. The graft then acts like a scaffold for bone cells to form and grow upon. In a few months enough new bone may have formed to support an implant.

Bone grafting can also be used if you’re having a tooth removed to preserve the bone even if you’re not yet ready to obtain an implant. By placing a bone graft immediately after extraction, it’s possible to retain the bone for up to ten years—enough time to decide on your options for permanent restoration.

Whatever your situation, it’s important that you visit us as soon as possible for a complete examination. Afterward we can assess your options and hopefully come up with a treatment strategy that will eventually include smile-transforming dental implants.

If you would like more information on obtaining dental implants, please contact us or schedule an appointment for a consultation.

By Renew Dental Arts, LLC
June 06, 2017
Category: Dental Procedures
Tags: dental implants  
ScreworCementWhichisBestforAttachingYourImplantCrown

If you’re in the initial planning stages for a dental implant, you may already be encountering a number of options to consider. One that may come up is how the visible crown will attach to the metal implant imbedded in the bone.

Generally speaking, implants are composed of two parts: a metal post most often made of titanium placed into the bone that serves as the “root” for the new tooth; and a visible, life-like crown made of dental porcelain that attaches to an abutment on the titanium post. The crown can be attached in one of two ways: either with a small screw through the biting surface of the crown into a receiving hole in the abutment or cemented to it.

The major advantage of a screwed crown is that it allows for easy removal of the crown if needed. While the titanium post can often last a lifetime, porcelain crowns more often need repair or replacement since they receive the brunt of the biting forces in the mouth. A screw-attached crown is much easier to remove than a cemented one.

On the other hand, screwed crowns have a small access hole that must be restored with a tooth-colored filling to help the crown appear natural. This isn’t too great an issue with back teeth but does make achieving a natural appearance in the front more difficult. Cemented crowns look more like a natural tooth and are thus more flexible in achieving the desired appearance.

Besides the possibility the cement may cause gum inflammation or bone loss, the chief detraction from cemented crowns is the difficulty in removing them. Crowns are often damaged in this process so it’s highly likely it will have to be replaced rather than repaired. It’s possible to use weaker cement, but this raises the risk of the crown coming loose at some point from the abutment.

As we plan for your implant, we’ll discuss which type of attachment will work best for you, depending on the tooth to be replaced and other conditions with your oral health. The end result, though, should be the same — a new, natural-looking tooth that serves you well for many years to come.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Crowns Attach to Implants.”